{
  "passed": false,
  "scope": "Nominal Three.js tube/contact meshes and native PCB pads. Stop datum and loaded axis are illustrative; spring engagement, retention, tolerances and insulation are not physically verified.",
  "configurations": [
    {
      "orientation": "default",
      "clip_stop_gap_mm": 1.35,
      "socket_housing_insertion_mm": 2.0865,
      "can_to_forward_anode_pad_mm": 1.9792,
      "project_clearance_target_mm": 2.8
    },
    {
      "orientation": "reversed",
      "clip_stop_gap_mm": 1.35,
      "socket_housing_insertion_mm": 2.0865,
      "can_to_forward_anode_pad_mm": 1.9792,
      "project_clearance_target_mm": 2.8
    }
  ],
  "can_span_x_mm": [
    23.445,
    39.445
  ],
  "pin_end_x_mm": 44.445,
  "socket_entrance_x_mm": 42.3585,
  "illustrative_stop_inner_face_x_mm": 22.095,
  "can_bottom_above_board_mm": 0.5,
  "move_tube_to_illustrative_stop": {
    "socket_housing_insertion_mm": 0.7365
  },
  "trial_only_not_applied": {
    "housing_insertion_mm": 3.5,
    "depth_is_manufacturer_requirement": false,
    "tube_shift_mm": 1.4135,
    "clip_stop_gap_mm": 2.7635,
    "can_to_forward_anode_pad_mm": 0.7082
  },
  "failures": [
    "Can is not seated at the illustrative clip stop",
    "Nominal can-to-anode-pad spacing is below the project 2.8 mm target",
    "Actual tube/contact fit, spring engagement and assembled insulation are unqualified"
  ],
  "assembly_qualified": false
}