DEVICE COMPATIBILITY
- Pip-Boy 3000 Mk V
- USER/ apps with APPINFO JSON registration
- Chrome or Edge for direct microSD and USB serial installation
ROBCO INDUSTRIES (TM)INSTALLER / PIP-BOY 3000 MK V00:00:00
← Return to model directory
TARGET LOCKED: Pip-Boy 3000 Mk VUSER/ + APPINFO JSON · Do not use on the other Pip-Boy model.
APP PACKAGE / ROBCO-WEATHER-MKV
RobCo Weather Mk V_
The weather and space-weather relay ported to the Mk V firmware-native USER app contract.
01 / PRECHECK
Compatibility + prerequisites
BEFORE PROCEEDING
- Back up the entire Pip-Boy microSD card before changing files.
- Use a data-capable USB cable or mount the microSD card directly.
- Do not install this package on a non-MkV Pip-Boy 3000; the app contracts are different.
02 / PROCEDURE
Install package
INSTALLER NOTES
- Use the browser installer below for direct card, USB serial, or ZIP installation.
- The installer writes application files only. It does not flash or replace device firmware.
- If direct removable-media access fails, download the ZIP and extract it to the microSD root.
Back up the card
Copy the complete microSD card to a safe location before installing or updating an app.
Launch the correct installer
Open the hosted Pip-Boy 3000 Mk V installer in Chrome or Edge and confirm the model shown at the top.
Choose one target
Select the mounted microSD root or connect the Pip-Boy over USB serial. Close other serial tools first.
Install the payload
Install directly, or download the generated ZIP and extract it to the microSD root while preserving its folders.
Reboot and verify
Safely disconnect, reboot the Pip-Boy 3000 Mk V, and complete the checks below.
03 / VERIFY
Confirm the install
- Weather appears under INV > APPS.
- The app opens the first synced location.
- The location and view controls respond correctly.
04 / RECOVERY
Troubleshooting
Weather is missing from INV > APPS.
Confirm USER/WEATHER.js and APPINFO/weather.json are present and reboot.
The cache is empty or stale.
Use Fetch Current Weather, then Sync Data to Device.
UNINSTALL / ROLLBACK
- Remove USER/WEATHER.js and APPINFO/weather.json.
- Optionally remove USER/WEATHER.JSON.
- Reboot the Mk V.
05 / RECORD
Package features
[01]
Current, forecast, and solar views
[02]
Firmware-native Mk V app registration
[03]
Browser-built offline weather cache
[04]
Mounted-card, USB serial, ZIP, and JSON workflows
Unofficial community software. Back up device storage before installation. Source and issue tracking remain available at https://github.com/hipstereclipse/RobCo-Weather-MkV.